Excessive dross formation increases zinc consumption and galvanizing cost… Dross formation has to be under control… In addition to that bottom dross should be cleaned regularly in order to prevent premature kettle failures… “ANI Metal Vibrating...
Preparation of steel for galvanizing is a key factor for controlled zinc consumption and best quality of coating. Galvanizing is possible with only hydrochloric acid and molten zinc, but every step added to these two steps will enhance the quality and decrease the...
You can watch the video related with the Hot Dip Galvanizing Plant in Algeria: design, production, installation and commissioning as well as galvanizing process consultancy were supplied by ANI METAL. ANI METAL, as one of the leading plant suppliers in the hot dip...
Hot Dip Galvanizing was first ‘discovered’ in 1742 by a French chemist named Melouin. 90 years later, Faraday discovered that Zinc sacrifices itself after his experiment with salty water, zinc and nails. We know that this property of zinc makes galvanizing one of the...
Galvanizing is one of the best coatings for corrosion protection of steel. It gives long life to steel structures in most environments. Its performance is achieved in C1 and C2 atmospheres the best, indoors and urban areas. Galvanizing still protects the steel in C5...
Hot dip galvanizing is a process of coating of steel with molten zinc to protect the steel from rusting and oxidation. It is a process that has been done for the last 170 years and it can be done simply by dipping the steel parts in HCl; hydrochloric acid, and then...
